Lecturer II, Project Management Technology Dept.

Mrs Ulari S. Onwuka

Mrs. Ulari Sylvia Onwuka

Lecturer II

B.Sc., M.Sc.
E-mail: ulari.onwuka@futo.edu.ng

A Brief Biography

Onwuka Ulari Sylvia (Mrs.), hails from Isuikwuato Local Government Area of Abia State. She had her Primary Education at St. Benedict’s Primary School, Igoli Ogoja between 1985-1990 after which she secured admission into the prestigious Holy Child Secondary School Mount Carmel, Ogoja in 1991. On completion of her JSSCE, she proceeded to the Federal Science College Ogoja in 1994 from where she obtained the SSCE in 1997. She gained admission into the Abia State University in the year 2000 to pursue a degree in Building which she successfully completed and was awarded a B.Sc in Building in 2005. Mrs Onwuka U.S proceeded for the one year mandatory National Service between 2006-2007. No time was spared as she embarked on a Postgraduate study in the renowned Federal University of Technology Owerri leading to the award of Master of Science in Construction Management in 2012, having satisfied all the requirements for the award of the degree.

In the same year, Mrs U.S. Onwuka sought to consolidate herself academically by enrolling for a PhD programme in project management technology in the same Department. This, she is earnestly working towards the successful completion of the program.

Her career progression commenced with the appointment as an Assistant Lecturer in 2014 in the Department of Project Management FUTO. Mrs Onwuka U.S is widely acknowledged as a committed staff. She is credited with sound academic advising, supervision, examination and graduation of undergraduates. She is actively involved in consultancy services, one of which was her membership of Building Committee, Redeemed Christian Church of God, (Grace Sanctuary) Imo Province.

Mrs Onwuka U.S. is an exemplary role model for young aspiring girls. She is a devout believer in Jesus Christ and happily married to Engr. Prof. D.O Onwuka and the marriage is graciously blessed with three Amazing kids, namely Shalom, David (jr) and Godstreasure.

Qualifications
Courses Assigned
Experience
Research Interest
Publications

Academic Qualification

  • B.Sc., Building, Abia State University, Uturu, 2005.
  • M.Sc., Project Management Technology, Federal University of Technology (FUTO), 2012.

Courses Assigned to Teach

  • PRT 502 HUMAN RESOURCES MANAGEMENT
  • PRT 413 MAINTENANCE MANAGEMENT
  • PRT 513 CONTRACT LAW AND ADMINISTRATION
  • PRT 407 PROJECT PLANNING AND CONTROL

Work Experience

  • Assistant Lecturer, Department of Project Management Technology, Federal University of Technology, Owerri.  –  (June 2014 to date)
  • Course Adviser, Department of Project Management Technology, Federal University of Technology, Owerri.  –    (January 2015 to date)
  • Member, Project Management Technology Department Board of Studies  –  (2014 to date)
  • Member, School of Management Technology Department Board of Studies  –  (2014 to date)

Research Interest

  • Construction project management
  • Construction materials and modelling

Publications:  

  1. Onwuka D.O. Anyanwu, T.U., Awodiji, C.T.G and Onwuka, S.U (2016) mix Design of palm Bunch Ash  – cementitious composite using regression theory, Int. Journal of Advanced Research in Science, Engineering and Technology, Vol. 3, Issue 2, pp. 1379-1391.
  2. Onwuka D.O, Wodiji C.T.G and Onwuka, S.U. (2015). Investigation of Effect of Water-cement Ratio on the Modulus of Rupture of concrete, Int. Journal of Engineering and Computer Science Vol. 4 Issue 7, pp. 13298-13305.
  3. Onwuka D.O., Egbulonu, R.B.A and Onwuka, S.U. (2013) optimization of concrete Based on its Elastic Modulus, Journal of Mechanical and Civil Engineering (IOSR – JMCE) Vol. 5, Issue 3, pp. 15-22.
  4. Onwuka D.O., Chijioke, C and Onwuka, S.U. (2013) Prediction of the crushing strength of SDA – clay fired Bricks using Simplex Theory, Journal of Mechanical and Civil Engineering IOSR – JMCE), Vol. 5, pp. 52-58.
  5. Onwuka, D.O., Okere, C.I., Ibearugbulem, O.M and Onwuka, U.S (2013). Computer-Aided Design of Concrete Mixes, Int. Journal of Computational Engineering Research, Vol. 3, Issue 2 pp. 67-81.
  6. Okere, C.E., Onwuka, D.O., Onwuka, S.U. and Arimanwa, J.I. (2013). Optimization of concrete mix cost using scheffe’s simplex Lattice Theory, Journal of Innovative Research in Engineering and Science. Vol. 4, Issue 1, pp. 443 – 454.
  7. Okere, C.E., Onwuka, D.O., Onwuka, S.U. and Arimanwa, J.I (2013), Simplex-Based concrete Mix Design, Journal of Mechanical and Civil Engineering 9IOSR – JMCE), Vol. 5, Issue 2, pp. 46-55.
  8. Arimanwa, J.I., Onwuka D.O, Arimanwa, M.C. and Onwuka, S.U. (2012), Prediction of the compressive strength of Aluminum waste – cement concrete using scheffe’s theory, Journal of materials in Civil Engineering, ASCE, Vol. 24, pp. 177-183.
  9. Onwuka, D.O. Egbulonu, R.B.A. and Onwuka, S.U (2012) Development of Response Function for Determining the modulus of elasticity of concrete Int. Journal of Engineering, Vol. 6 pp. 51-62.
  10. Onwuka, D.O, Arimanwa, J.I, Arimanwa, M.C and Onwuka, S.U. (2012) Computer programs for the Optimization of compressive strength of AW-Cement concrete. The Heartland Engineering – Journal of the Nig. Society of Engineers, Owerri Branch, Vol. 6, N0. 1, pp.47-50.
  11. Onwuka, D.O, Okere, C.E, Arimanwa, J.I and Onwuka, S.U (2011) Prediction of concrete Mix Ratios using modified Regression theory, Computer Method in Civil Engineering, Vol. 2, N0. 1, pp. 95-107.
  12. Onwuka D.O, Egbulonu, R.B.A. and Onwuka, S.U. Interactive software for costing of concrete based on its Elastic Modulus. International Journal of Science and Research Publication Vol. 3, Issue 10, pp 1-8.
  13. Onwuka, D.O., Egbulonu, R.B.A. and Onwuka, S.U. (2013) computation of modules of Elasticity of concrete American Journal of Engineering Research. Vol. 2, Issue 09, pp 55-61.

Print Friendly, PDF & Email